Mini Magnetic Inductive Flow Meter
- Features
- Specification
- Model Selection
- Applications
- Download
The RBEF-E SERIES low flow Magnetic Inductive Flow Sensor according to the electromagnetic measurement principle. According to Faraday’s Law of magnetic induction a voltage is induced in a conductor moving through a magnetic field. It is a compact, low cost. No moving parts,Frequency and 4 to 20 mA Output, Maintenance-Free, With display and blind type to meet different applications demand.. the RBEF-E mini Magnetic Inductive flow sensor can be applied in applications dealing with contaminated media. With Temperature measuring, this series provides a reliable measuring technique, an obstruction free pipe cross-section, as well as a quick response time, making this series ideal for interference free operation. Any change in temperature, density, viscosity, concentration or electrical conductivity of the liquid, does not affect the output signal of this Magnetic Inductive Flow Sensor.
- Size: DN2.5, 3, 6, 8, 10, 15, 20mm
- Velocity range: 0.01m/s – 10 m/s
- Accuracy: ±0.5% of RS (Velocity>0.6m/s) or ±3mm/s(Velocity≤0.6m/s)
- Measuring Direction: Bi-directional measurement
- Max Working Pressure: 1.0MPa
- Max Working Temperature: 60℃ for PE liner, 90℃ for PEEK or Ceramic liner
- Liner: PE, PEEK, Ceramic
- Electrodes: SS316L or HC
- Low cost, Full-bore design
- Repeatability: 1/3 of accuracy
- Temperature: PT1000, 0.1℃ resolution
- Media Conductivity: 20 ms/cm
- LCD display: flow rate and total flow
- Analog output: 4 – 20mA
- Pulse output: 0 – 5K Hz
- Relay Output: optional, 1 Relay 2A/30VDC
- RS485 MODBUS: Optional for Display version, Standard for Blind version
- Enclosure: Aluminum, IP65 for Blind version
- Connection: G1/2 or NPT 1/2
- Power supply: 24VDC, ≤100mA
RBEF-E Mini Inductive Magnetic flow meterModel Selection:
Model Selection |
|||||||||||
|
Pipe Size |
||||||||||
2.5 |
DN2.5 |
||||||||||
3 |
DN3 |
||||||||||
6 |
DN6 |
||||||||||
8 |
DN8 |
||||||||||
10 |
DN10 |
||||||||||
15 |
DN15 |
||||||||||
20 |
DN20 |
||||||||||
|
Power |
||||||||||
D |
18-36VDC |
||||||||||
|
Display |
||||||||||
N |
Blind |
||||||||||
NH |
Blind + Handheld (RS485 communicator) |
||||||||||
D |
With Display |
||||||||||
|
Electrode |
||||||||||
S |
SS316L |
||||||||||
H |
HC |
||||||||||
|
Liner |
||||||||||
PK |
PEEK |
||||||||||
C |
Ceramic |
||||||||||
|
Output |
||||||||||
A |
4-20mA |
||||||||||
P |
Pulse |
||||||||||
R |
Relay |
||||||||||
M |
RS485 |
||||||||||
S |
Others, pls clarify |
||||||||||
|
Input |
||||||||||
N |
Without temperature sensor |
||||||||||
T |
With temperature sensor |
||||||||||
|
Temperature |
||||||||||
1 |
90℃ for PEEK or Ceramic liner |
||||||||||
2 |
Special, clarify |
||||||||||
|
Connection Type |
||||||||||
G1/2 |
G 1/2"-ISO 228 external |
||||||||||
G1/4 |
G 1/4"-ISO 228 external |
||||||||||
NPT1/4 |
NPT1/4 " |
||||||||||
DIN |
DIN Flange(SS304) |
||||||||||
ANSI |
ANSI Flange (SS304) |
||||||||||
S |
Others, pls clarify |
||||||||||
|
Flow range |
||||||||||
1 |
0.3 to 0.6m/s |
||||||||||
2 |
More than 0.6m/s |
Remark:
1. RS485 Standard for Blind version;Display is optional;
2. Handheld RS485 communication is foroptional;
3. Special demands, pls inquire, can becustomized.
Magnetic Inductive Flow Sensor Topical Applications
- Contaminated liquid flow monitoring
- Flow of conductive liquids
- Water & wastewater treatment
- Industrial systems
- Irrigation applications